Mac mini remote access: how to control it from another Mac

Updated November 2026

On the same network, the built-in Screen Sharing is enough. Over the internet you need a VPN or a remote desktop app that connects without port forwarding. Either way, change a few settings on the Mac mini first, while a monitor is still attached.

MethodReachYou getPrice
Screen SharingSame network, or the internet through a VPNFull desktopBuilt in
Remote desktop appInternet, no router setupFull desktopDepends on the app
SSHSame network, or the internet through a VPNTerminal onlyBuilt in

Prepare the Mac mini first

A remote connection usually fails because the Mac is asleep or is waiting at the login window after a restart. These settings deal with both.

Keep it awake

Open System Settings → Energy and turn on these options:

Decide what happens after a restart

After a restart the Mac stops at the login window, and not every remote tool can connect there. System Settings → Users & Groups → Automatically log in as gets past it, but Apple disables that setting while FileVault is on.

With FileVault on, someone has to enter the password at the Mac after every restart. With it off, the Mac comes back on its own, and anyone who walks away with it can read its disk. For a Mac in a locked room that can be a fair trade. In a shared office it usually isn't.

Running without a monitor

An Apple silicon Mac mini runs with no display attached, but macOS may fall back to a low resolution. An inexpensive HDMI dummy plug makes macOS see a display and offer normal resolutions.

Before you unplug the monitor for good, restart the Mac and check that you can connect without touching it.

Option 1: Screen Sharing

On the Mac mini, go to System Settings → General → Sharing and turn on Screen Sharing. It can't run together with Remote Management, so turn that off if it's on. Then choose who may connect under Allow access for.

On the other Mac, open the Screen Sharing app, or in Finder choose Go → Connect to Server and enter vnc:// followed by the Mac mini's address.

If both Macs have Apple silicon and macOS 14 or later, High Performance mode is available. Apple asks for 75 Mbps for a single 4K display, consistent low latency and UDP ports 5900 to 5902 open between the Macs, so in practice it suits a fast local network. It supports virtual displays of up to 4K.

Screen Sharing over the internet

Apple describes Screen Sharing as a feature for computers on your network. To use it from elsewhere, put both Macs on one private network with a VPN or a mesh VPN such as Tailscale.

Don't forward port 5900 from your router to the internet. That puts the Mac's login in front of anyone who scans for the port.

Option 2: a remote desktop app

Apps such as AnyDesk, TeamViewer, Chrome Remote Desktop and Jump Desktop connect through the vendor's servers, so there's nothing to configure on the router. macOS makes each of them ask for Screen Recording and Accessibility permissions on the Mac mini. If you're considering AnyDesk, see AnyDesk on a MacBook for the permissions and common problems.

Option 3: SSH

If a terminal is all you need, turn on Remote Login in the same Sharing settings and connect with ssh user@address. As with Screen Sharing, use a VPN to reach it from outside your network.

Where Macitor fits

Macitor is a Mac-to-Mac remote control app we're building. It isn't released yet. It connects two Macs without a public IP or open ports and passes real trackpad gestures, such as a three-finger swipe between Spaces, to the remote Mac.

It needs macOS 15 or later on Apple silicon, on both Macs. Native swipes need macOS 15.6 or later on both. Macitor works inside a logged-in session, so the Mac mini has to be on, logged in and running the app, and you allow unattended access for your Mac once in advance. After a restart, someone or automatic login has to log in first, so the FileVault trade-off above applies.

Common questions

Can I control a Mac mini from a MacBook?

Yes. Every method here works from a MacBook. Treat the MacBook as the other Mac in the steps above.

Do I need a public IP?

Not with a remote desktop app or a mesh VPN. You'd only need one to forward ports yourself, which isn't a good idea for Screen Sharing.

Be the first to swipe.

Macitor is getting ready to launch. Leave your email and we’ll send you a link as soon as access opens.

Get it first